Lapping is a loose abrasive machining process that differs from honing or grinding because the abrasive action comes not from a solid abrasive (like a grinding wheel) but from a slurry--abrasive particles mixed with oil or water. The slurry forms an abrasive film between the underlying lapping plate and the parts to be lapped. The part stock is gradually removed through the rolling and sliding action of the abrasive grains between the lapping wheel and the workpiece. The slurry, along with the removed stock, drains away from the table.https://www.szjiuyuda.com/lapping-machine/

Airless spray application shall be in accordance with the following procedure:

as per steel structure paint Manual Vol.1 & Vol.2 by SSPC, USA, Air less spray relies on hydraulic pressure rather than air atomization to produce the desired spray. An air compressor or electric motor is used to operate a pump to produce pressures of 1000 to 6000 psi.https://www.westwu-machine.com..../pipe-spray-painting

Chlorine dioxide is a disinfectant. When added to drinking water, it helps destroy bacteria, viruses and some types of parasites that can make people sick, such as Cryptosporidium parvum and Giardia lamblia. The Environmental Protection Agency (EPA) regulates the maximum concentration of Chlorine Dioxide Tablets in drinking water to be no greater than 0.8 parts per million (ppm).

https://www.zhaoguangroup.com/....chlorine-dioxide-tab

Level switches are an essential part of production operations and are used in harsh conditions where there are extremes in temperature, pressure, and vibrations. The diversity of level switches makes them applicable to any conditions for measuring a wide array of products. Their accuracy, reliability, and durability are a necessity for the efficiency of industrial applications.

http://www.statessensor.com/level-switch/

Uses of Battery Cell include providing backup power during a power outage. At home, the batteries are typically wired to electrical appliances. If the power goes down, these appliances still receive power. For example, many customers have energy rates that change based on the time of the day. Batteries can help these customers manage their energy by storing energy during low-cost times and discharging energy during high-cost times. Batteries can store energy from solar and wind and discharge it when it is needed the most. In this article, let us study the applications and uses of batteries.https://www.qspowerbattery.com/battery-cell